Takebera - 8 x 1 inches bamboo knife. Use for trimming, carve shaping, cleanup the foot of wet pots and sgraffito. 

>>> details

K001 ................

$5


Takebera - 8 x 0.75 inches bamboo knife. Use for trimming, carve shaping and sgraffito. 

>>>details

K005 

........................................

$3


Takebera - 10 x 1.75 inches bamboo knife. For clean up the foot of large pots or use as a long rib.

>>> details

K003 ..............

$7


Takebera - 8.5 inches long modeling tool, flat on one end and round on the other end. Good for modeling, cleaning and sgraffito. 

>>> details

K006

..................................................

$3


Takebera - 8 inches long modeling tool, sharp on one end and flat on the other end. Good for modeling, cleaning and sgraffito. 

>>> details

K007

...................................................

$1.5


8" Kanna - Made of steel with rustproof coating. Used to trim pieces, for carving, sgraffito and to scrape off excess glaze.

>>> details

Kanna - M001

....................................

$6


8" Kanna - Made of steel with rustproof coating. Used to trim pieces, for carving, sgraffito and to scrape off excess glaze.

>>> details

Kanna - M002

..................................

$6


8" Kanna - Made of steel with rustproof coating. Used to trim pieces, for carving, sgraffito and to scrape off excess glaze.

>>> details

Kanna - M003

..................................

$6


8" Kanna - Made of steel with rustproof coating. Used to trim pieces, for carving, sgraffito and to scrape off excess glaze.

>>> details

Kanna - M004

..................................

$6


7" Fluting Tools - Made of steel with rustproof coating. Used to fluting, for carving, sgraffito and to scrape off excess glaze.

>>> details

8" Fluting tool - M005

.................

$6


7" Kanna - Made of steel with rustproof coating. Used to trim pieces, for carving, sgraffito and to scrape off excess glaze.

Kanna - M006

...................................

$4


7" Trim Knife - Heavy duty steel blade with solid wood handle. 

>>> details

TMK01

...............................................

$3


Umakaki - 2.5" x 2.5" " trimming harp made of steel with rustproof coating. Used to level flat, wide surfaces such as the bottom of a shallow dish or plate.

>>> details

Small Umakaki, M007

...................

$5


Umakaki - 3.5" x 3" " trimming harp made of steel with rustproof coating. Used to level flat, wide surfaces such as the bottom of a shallow dish or plate.

>>> details

Large Umakaki, M008

.....................

$6


Yumi - 3.25" x 3" yumi made of steel with rustproof coating. Use for trimming of uneven rims or create flat sides on round objects.

>>> details

3.25" steel yumi, M009

...........

$5


Yumi - Use for trimming of uneven rims or create flat sides on round objects.

>>> details

2.75" x 3.5", YM01

......................

$3

out of stock

3.25" x 5", YM02

.......................

$5


Large Yumi - Use for trimming of uneven rims or create flat sides on round objects.

>>> details

  7" x 5", YM03

..............................

$9


Clay Hole Cutter - Made of stainless steel with wood handle.

 >>> details

0.18" hole diameter, HCS01

.............

$2

0.35" hole diameter, HCS02

................

$2.5

0.5" hole diameter, HCS03

.................

$2.8

0.9" hole diameter, HCS04

.................

$3


Hole Drill for Salt & Pepper Shakers - Use to drill holes for salt and pepper shakers.

>>> details

  SPD01

..................................................

$2.5


7.5" Double-ended Cleanup Tool -  For cleanup and sculpture. Blades are made of stainless steel.

>>> details

CLT02

.................................................

$3


7.5" Double-ended Sgraffito Tool - For cleanup, sgraffito and sculpture. Blades are made of stainless steel.

>>> details

LCT03

.................................................

$3


5.5" Double-ended Sgraffito Tool - For sgraffito and sculpture. 

>>> details

SGT01

.................................................

$3


Ultra Fine Ribbon Sculpting Tools - Wire is 0.5mm thick, only half the thickness of regular ribbon tools. They are for detail sculpting. 6" long double-ended. Made of aluminum.                                                                                                     >>> details

DRT01

....................................................

$2.5

DRT02

....................................................

$2.5

DRT03

....................................................

$2.5

DRT04

....................................................

$2.5

DRT05

....................................................

$2.5


 >>> details
Grid Pattern Canvas - for wedging boards and tables. 45" wide. Sold in following pre-cut sizes. 

36" x 45" folded canvas, CV4503

..............................

$32

48" x 45" folded canvas, CV4504

..............................

$42

60" x 45" folded canvas, CV4505

..............................

$53

72" x 45" folded canvas, CV4506

..............................

$63


Shipping & Handling Charges
Total Purchase US & Canada International
Surface Air Surface Air
Up to $24.99 $8 Check Check Check
$25-$57.99 $15 Check Check Check
$58-$99.99 $20 Check Check Check
$100-$199.99 $35 Check Check Check
Over $200 $40 Check Check Check

Order by credit cards or PayPal

CHeckout
USA & Canada surface
All orders will be shipped by Canada Post. Shipping time to US and Canada is about 2 to 6 days by air, and  1 to 4 weeks by surface mail. All International orders will be shipped via Canada Post International Parcel-Surface. Shipping time is about 4 to 15 weeks depends on destination.  We can ship by faster and traceable couriers services upon your request, please email us for additional freight charges. Customers are responsible for any duties and taxes, if any, in their countries.

 

 

Order by checks or Money Orders:

Order Form

 

back to home page


Please email to info@bambootools.com for couriers shipping charge